DEWALT DCS361MB 20V Max Cordless Miter Saw Bare tool utilizes a 20V Max Battery Pack (DCB204) which provides on average, 183 cuts of 2x4 Pine - or 275 cuts of 3-1/4 Pine baseboard. It offers an integrated XPS cross cut positioning system that provides adjustment free cut line indication for better accuracy and visibility. The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3Degree to 48Degree left. With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2x8 inch horizontal cut capacity, this saw will handle most of the common cuts needed. The adjustable stainless steel miter detent plate has 10 positive stops to improve productivity and ensures cutting accuracy. An oversized bevel scale makes bevel angle adjustments accurate and easy. The compact, lightweight design (31.6 bs.) allows for easy transport and storage. It has a cam lock miter handle which delivers quick and accurate miter angles, along with a precise miter system and machined base fence support for optimized durability and cutting accuracy.

11.7 HP Honda GX390 Commercial Series Engine Powerful 389cc 4-cycle engine is easy to start, quiet & reliable Oil Alert monitors oil level, makes maintenance easier 3 year engine warranty through Honda CAT Brand 4.0 GPM Triplex Plunger Pump

The DEWALT 12" Double Bevel Compound Miter Saw is powered by a 15A 3,600 RPM and offers a new precise miter system and machined base fence support for optimal accuracy. Features a new handle design for maximum portability, cam lock miter, detent override, bevel crown stops and is best in class capacity. Constructed for easy, hassle-free use saw's capacities are miter 0 to 60 degree left, 0 to 50 degree right, bevel 0 to 48 degree left and right, cross cuts 2 x 14 on 90 degree and miters 2 x 10 on 45 degree, base capacity 6-1/2" left and right with a crown capacity of 6-5/8". Carbide blade, dust bag, wrench and manual, 90 day money back guarantee, one year service, three year limited warranty and accessory DW7187 adjustable miter saw laser system included. Weighs 54 pounds. The DEWALT DWS780 12-inch double bevel sliding compound miter saw expertly walks the line between the rugged durability and fine precision that professionals need on the job site. From delicate woodworking to heavy-duty framing and deck building, the DWS780 provides the accuracy, capacity, and portability that cabinetmakers, trim carpenters, framers, installers, and contractors need.

DWS780 12-Inch Double Bevel Sliding Compound Miter Saw At A Glance: Advanced dust collection system captures over 75 percent of dust generated—slide or chop Powerful 15-amp motor delivers 3,800 RPM Power cord is routed through the rail in the back, helping to eliminate interference with the slide DWS780’s compact frame weighs just 56 pounds for portability Backed by three-year limited warranty, one-year free service contract, plus 90-day money-back guarantee

The DWS780 12-inch double bevel sliding compound miter saw is not only durable enough to handle rugged materials, it also is equipped with state-of-the-art technology for fine and precision cutting (view larger).

It allows you to bevel from zero to 49 degrees with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, 45 degrees, and 49 degrees in both right and left directions (view larger).

Precise Cutting Without Recalibration The DWS780 miter saw features extremely solid construction and the new XPS cross-cut alignment system that features an improved ultra-bright LED light, which casts a laser-like shadow on the work surface and shows the user precisely where the blade will come in contact with the material. This unique alignment system requires no recalibration over time or after changing blades, which makes it more accurate and durable than traditional laser guides. Ultimate Durability The DWS780 miter saw’s rugged guards; precision-machined castings, fences, and bevel system; and tough stainless steel miter detent plate are designed to withstand the constant rigors of the job site. High-Capacity Cutting The saw features a powerful 15-amp motor that delivers 3,800 RPM. For convenience, the power cord is routed through the rail in the back, eliminating interference with the slide. Additionally, the saw offers an industry-leading combination of cut capacities, which includes 6-3/4-inch vertical capacity, 7-1/2-inch nested crown capacity, 13-7/8-inch horizontal capacity, and exclusive back fence design that cuts up to a 2x16 at a 90-degree angle and 2x12 at a 45-degree angle. To simplify and maximize vertical cutting capacity, the unit includes a rail lock latch for holding the head away from the fence. Hassle-Free Operation The dual bevel system is easy to see and use in job site conditions thanks to its high-visibility scale and easy angle adjustment. Bevel from zero to 49 degrees with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, 45 degrees, and 49 degrees in both right and left directions. The saw also miters 60 degrees to the right and 50 degrees to the left and features an adjustable miter detent plate with 10 positive stops. A cam lock miter button allows the user to lock angles between detents. A miter detent override is also used to allow precise angle adjustment without falling into detents. What's in the Box One DEWALT DWS780 12-inch double bevel sliding compound miter saw, one carbide blade, one blade wrench, one dust bag, and one vertical material clamp.

DEWALT's DWS780 can tackle a variety of applications while still be compact and lightweight for easy transport (click each to enlarge).

The DEWALT DCK940D2 20V MAX Lithium Ion 9-Tool Combo Kit contains all the tools you need for any/all projects! The DCD771 20V MAX* Lithium Ion 1/2" Compact Drill Driver delivers 300 unit watts out (UWO) of power ability completing a wide range of applications. The DCF885 20V MAX* Lithium Ion 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadows. The DCS381 20V MAX* Lithium Ion Reciprocating Saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft, and the DCS393 20V MAX* Lithium Ion Circular Saw with 6-1/2" carbide blade can cut 2x4's at a 45deg angle in a single pass. The DCS355 20V MAX* Lithium Ion Oscillating tool QUICK-CHANGE Accessory System allows blades and attachments to be changed quickly without wrenches. The DCL040 20V MAX* Lithium Ion LED work light delivers 110 lumens of light output. The DCG412 20V MAX* Lithium Ion 4-1/2" Grinder 7,000 RPM motor provides high power for cutting and grinding applications. The DCR006 20V MAX* Bluetooth Jobsite Speaker allows you to stream music wirelessless from your smart phone or tablet, and finally, the DCD740 20V MAX* Lithium Ion 3/8"" Right Angle Drill provides dual speed ranges (0-650/0-2000) rpm for increased user flexibility for a wide range of applications. Includes: 1) DCD771 Drill/Driver, 1) DCF885 1/4" Impact Driver, 1) DCS381 Recip Saw, 1) DCS393 Circ Saw, 1) DCS355 Oscillating Tool, 1) DCL040 LED Worklight, 1) DCG412 Grinder, 1) DCR006 Bluetooth Speaker, 1) Right Angle Drill, 2) DCB203 20v MAX XR Batteries (2.0AH), charger, 6-1/2" Saw Blade, Side Handle (DCG412), Wrench (DCG412), Universal Accessory Adapter.