The DEWALT DCST920B 20V MAX Lithium Ion XR Brushless String Trimmer (Baretool) provides precise power control with a variable speed trigger as well as performance and run time management with the Hi/Lo speed control switch. The brushless motor maximizes motor efficiency and durability. The patented gear drive design will provide more torque and maintain cut speed under load, while the dual .080" line with bump feed clears a full 13 Inch. Well balanced and only 8.5 lbs., the string trimmer easy to maneuver and puts less stress on the user. This is a bare tool item - battery sold separately.

DEWALT-designed electronics have been built into both tools’ switches to provide maximum life for the tools and batteries by helping to protect them from overheating, overloading, and deep discharge during use. The 20-volt’s lithium-ion batteries provide up to 35 percent more runtime than existing 18-volt lithium-ion battery technology, and the included Energy Star-qualified charger has dual voltage capabilities and it is compatible with both 12-volt max and 20-volt max DEWALT lithium-ion batteries. The tools’ slim handles fit easily into users’ hands, increasing the level of comfort during the course of long jobs, and the bright built-in LED work lights above the triggers have a 20-second delay that improves visibility in dimly lit spaces

The DEWALT DCK296M2 20V XR Lithium Ion Premium Brushless Hammer/Impact Combo (4.0Ah) features a DEWALT-built brushless motor that delivers up to 57% more run time over brushed. The XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs. The DCD995 20V MAX1/2" hammerdrill features a 3-speed, high performance (0-2,000 RPM) all-metal transmission that optimizes tool-to-task for fast application speeds and improved run time; 0-34,000 BPM for fast drilling in masonry materials; a compact size at 8.4" front-to-back length and lightweight at 4.7 lbs. Great for fitting in tight areas. The DCF886 20V MAX 1/4" impact driver provides 1,500 in-lbs. of max torque at fast 0-2,800 RPM speed and 0-3,200 impacts per minute; a compact size at 5.6" front-to-back length and lightweight at 3.4 lbs. Also great for fitting into tight areas. Both tools feature LED lights with 20 second trigger release delay, providing increased visibility in dark or confined spaces. Total kit includes: (1) DCD995 1/2" Hammerdrill, (1) DCF886 1/4" Impact Driver, (2) 20V MAX XR High Capacity Li-Ion Batteries (4.0Ah), (1) Fast charger, (2) Belt Hooks, (1) Bit Holder, (1) 360Degree side handle and Contractor Bag.

The DEWALT 12" Double Bevel Compound Miter Saw is powered by a 15A 3,600 RPM and offers a new precise miter system and machined base fence support for optimal accuracy. Features a new handle design for maximum portability, cam lock miter, detent override, bevel crown stops and is best in class capacity. Constructed for easy, hassle-free use saw's capacities are miter 0 to 60 degree left, 0 to 50 degree right, bevel 0 to 48 degree left and right, cross cuts 2 x 14 on 90 degree and miters 2 x 10 on 45 degree, base capacity 6-1/2" left and right with a crown capacity of 6-5/8". Carbide blade, dust bag, wrench and manual, 90 day money back guarantee, one year service, three year limited warranty and accessory DW7187 adjustable miter saw laser system included. Weighs 54 pounds. The DEWALT DWS780 12-inch double bevel sliding compound miter saw expertly walks the line between the rugged durability and fine precision that professionals need on the job site. From delicate woodworking to heavy-duty framing and deck building, the DWS780 provides the accuracy, capacity, and portability that cabinetmakers, trim carpenters, framers, installers, and contractors need.

DWS780 12-Inch Double Bevel Sliding Compound Miter Saw At A Glance: Advanced dust collection system captures over 75 percent of dust generated—slide or chop Powerful 15-amp motor delivers 3,800 RPM Power cord is routed through the rail in the back, helping to eliminate interference with the slide DWS780’s compact frame weighs just 56 pounds for portability Backed by three-year limited warranty, one-year free service contract, plus 90-day money-back guarantee

The DWS780 12-inch double bevel sliding compound miter saw is not only durable enough to handle rugged materials, it also is equipped with state-of-the-art technology for fine and precision cutting (view larger).

It allows you to bevel from zero to 49 degrees with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, 45 degrees, and 49 degrees in both right and left directions (view larger).

Precise Cutting Without Recalibration The DWS780 miter saw features extremely solid construction and the new XPS cross-cut alignment system that features an improved ultra-bright LED light, which casts a laser-like shadow on the work surface and shows the user precisely where the blade will come in contact with the material. This unique alignment system requires no recalibration over time or after changing blades, which makes it more accurate and durable than traditional laser guides. Ultimate Durability The DWS780 miter saw’s rugged guards; precision-machined castings, fences, and bevel system; and tough stainless steel miter detent plate are designed to withstand the constant rigors of the job site. High-Capacity Cutting The saw features a powerful 15-amp motor that delivers 3,800 RPM. For convenience, the power cord is routed through the rail in the back, eliminating interference with the slide. Additionally, the saw offers an industry-leading combination of cut capacities, which includes 6-3/4-inch vertical capacity, 7-1/2-inch nested crown capacity, 13-7/8-inch horizontal capacity, and exclusive back fence design that cuts up to a 2x16 at a 90-degree angle and 2x12 at a 45-degree angle. To simplify and maximize vertical cutting capacity, the unit includes a rail lock latch for holding the head away from the fence. Hassle-Free Operation The dual bevel system is easy to see and use in job site conditions thanks to its high-visibility scale and easy angle adjustment. Bevel from zero to 49 degrees with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, 45 degrees, and 49 degrees in both right and left directions. The saw also miters 60 degrees to the right and 50 degrees to the left and features an adjustable miter detent plate with 10 positive stops. A cam lock miter button allows the user to lock angles between detents. A miter detent override is also used to allow precise angle adjustment without falling into detents. What's in the Box One DEWALT DWS780 12-inch double bevel sliding compound miter saw, one carbide blade, one blade wrench, one dust bag, and one vertical material clamp.

DEWALT's DWS780 can tackle a variety of applications while still be compact and lightweight for easy transport (click each to enlarge).